Barco ClickShare is used to wirelessly share your laptop or mobile device screen through a room's audiovisual system.

ClickShare is only available in selected rooms at M&OP . Rooms with this system will have a ClickShare USB dongle located near the audiovisual (AV) system.

Connecting through a USB dongle

  1. Locate the room's AV touch panel and select 'POWER ON'.
    • If the touch panel is black or showing 'PRESS SCREEN TO ACTIVATE', touch the display to activate the panel.
  2. Select the 'Click Share' button at the bottom of the screen.
  3. Connect the ClickShare USB dongle to your laptop. The light on the dongle will flash.
  4. If you're using a Windows device, open 'File Explorer' > 'ClickShare' > 'ClickShare_for_Windows'. If you're using a Mac, open 'Finder' > 'ClickShare'> 'ClickShare_for_Mac'.
  5. When ClickShare is ready, the light on the dongle will stop flashing. To share your screen on the display, click the button on the dongle. The light on the dongle will change to red.
  6. To stop sharing your screen, click the button on the dongle again.